Tinker Board

    tinker board

    tinker your way to the future

    Tinker board is a single-board computer in an ultra-small form factor that offers class-leading performance while leveraging outstanding mechanical compatibility. The tinker board offers makers, IoT enthusiasts, hobbyists, PC DIY enthusiasts and others a reliable and extremely capable platform for building and tinkering ideas into reality.
    1 Micro USB
    power-in

    2 HDMI
    3 MIPI CSI
    4 192K/24bit
    HD Audio

    5 GbE LAN
    6 PWM
    7 S/PDIF
    8 MIPI DSI
    9 Upgradable i-PEX antenna header
    10 802.11 b/g/n Wi-Fi &
    Bluetooth 4.0 + EDR

    11 40-pins GPIO header
    12 USB 2.0 Ports

    Features & Functionality

    Class Leading Performance

    Using a powerful and modern quad-core ARM-based processor, the Rockchip RK3288, tinker board offers significantly improved performance, versus other popular SBC boards. Realizing the growing demands of different builds and projects, the tinker board features up to 2GB of LPDDR3 dual-channel memory. Tinker board is also equipped with an SDIO 3.0 interface that offers significantly faster read and write speeds to expandable microSD cards used for the OS, applications and file storage.

    Robust GPU Performance & Functionality

    Featuring a powerful but energy-efficient design, the tinker board supports next-generation graphics and GPU Compute API's. Powered by an ARM-based Mali T764 GPU, the tinker board's GPU and fixed function processors allow for a wide range of uses, including high-quality media playback, gaming, computer vision, gesture recognition, image stabilization and processing, as well as computational photography and more. Multimedia enthusiasts will appreciate the fixed-function H.264 and H.265 playback support, including playback of HD and UHD video*.

    *HD & UHD video playback at 30 fps is currently only possible via the Rockchip video player, which is limited to support under TinkerOS. Currently, third-party video players and applications may not offer hardware acceleration and may likewise offer limited playback performance and/or stability. Please refer to the FAQs for more information.

    HD Audio Quality

    Further improving on key areas found lacking on many SBC boards, tinker board is equipped with an HD codec that supports up to 192kHz/24-bit audio. The audio jack can support both audio output and a microphone in, without an extension module

    Maker-Friendly, with IoT Connectivity

    Tinker board features standard maker and hobbyist connectivity options, including a 40-pin GPIO interface. Additionally, it comes equipped with two HD MIPI connections allowing for HD displays and HD cameras. For those interested in network centric or LAN storage they will appreciate that Tinker board features Gbit LAN, which offers superior throughput when compared to traditional 10/100 Ethernet controllers. Furthermore, tinker board's LAN port offers a non-shared bus design which helps to maximize and stabilize throughput, ensuring outstanding concurrent LAN and other onboard bus performance. Tinker board's network connectivity is aided by the inclusion of an integrated shield Wi-Fi and Bluetooth controller, which ensures a reduction in interference and improved radio performance. Enthusiasts will also appreciate the IPEX antenna header that allows for upgrades to the onboard antenna.
    Rounding out its connection options, tinker board also features a full-size HDMI output for connection to TVs, monitors and other HDMI-enabled displays, as well as four USB 2.0 ports for extensive peripheral and accessory connectivity.

    Enhanced DIY Design

    Careful consideration went into the design and development of the tinker board to provide a superior end user experience for first-time builders or experienced hobbyists. Makers will appreciate the improved visibility and clarity of the color-coded GPIO header that allows for quick and easy recognition of respective pin headers. The tinker board's PCB dimensions and topology also mirror standard SBC boards that allow support for a wide range of chassis and physical accessories.
    The PCB also features silk-screening with connection header and location callouts, for improved connection clarity. Onboard MIPI headers also feature contrasting colored pull tabs. Tinker board also includes a heatsink, which helps improve heat dissipation under heavy loading or in hot ambient environments.

    Documentation

    Getting started

    Requirement:

    .1 x Micro SD card with at least 8GB capacity
    .1 x Micro USB cable and a 5V/2A USB power adapter with LPS marking
    .1 x Monitor with HDMI cable
    .1 x Keyboard and Mouse set


    1. Insert the microSD card into a Linux PC.
    2. Rename the image to output.img and then put the file into the FlashUSB folder.
    3. Execute FlashUSB.sh
    ===============================================
    Select the disk you want to flash:
    sdc  -Multiple_Flash_Reader_058F63616476-0:1
    sdb  -Generic-_Compact_Flash_058F63616476-0:0
    Enter the number:0
    dd if=/home/yihsin/Rockchip/aa7-demo/out/target/output.img of=/dev/sdc seek=0 bs=16M conv=notrunc
    flash start!
    flash end!
    ===============================================
    Insert the microSD card into the slot on the tinker board.
    Connect the power supply, keyboard, mouse and your monitor. Now boot it up!


    1. Insert the microSD card into a Windows PC.
    2. Download and run the "Win32DiskImager" application.
    2.1 Browse and select the source image file to be flashed (Image File).
    2.2 Select the microSD card as the destination (Device).
    2.3 Click "Write".



    3. Safely remove the microSD card with the new bootable image, then insert into the microSD card slot on the tinker board.
    4. Connect the power supply, keyboard, mouse and your monitor. Now boot it up!

    Insert the bootable micro SD card into your tinker board, then connect the power supply, keyboard, mouse, and monitor to boot up


    TinkerOS

    A Debian-based distribution ensures a smooth and functional experience, directly out of the box. Whether it's browsing the web, watching videos, or writing scripts, TinkerOS is a great starting point for your next project or build.

    Hardware

    The tinker board requires 5V/2~2.5A power via the micro-USB port. The exact amount of current (mA) the tinker board requires will depend on what's connected to it. For general use, a 2A power supply from a reputable retailer will provide ample power to run your tinker board.

    Typically, tinker board uses between 700 to 1000mA, depending on which peripherals are connected. It may use as little as 500mA when no peripherals are attached. Maximum power for the tinker board is 1A. If you need to connect a USB device to bring power requirements above 0.5A, then you must connect to it via an externally powered USB hub.


    The tinker board is equipped with four USB 2.0 ports. These are connected to the GL852G USB Hub from the upstream USB port via the RK3288.

    The USB ports enable the attachment of peripherals such as keyboards, mice and webcams. This provides the board with additional functionality.

    There are some differences between the USB hardware on the tinker board and the USB hardware on desktop computers, laptops and tablets.

    The USB host port inside the tinker board is for power supply only, RK3288, was originally intended to be used in the mobile market, e.g. the single USB port on a phone for connection to a PC, or to a single device. In essence, the OTG hardware is simpler than the equivalent hardware on a PC.

    OTG typically supports communication to all types of USB devices, but to provide an adequate level of functionality for most of the USB devices that one might plug into a tinker board, the system software has to do more work.


    Learn More

    Supported Devices

    In general, every device supported by Linux can be used with the tinker board (exceptions are detailed below). Linux offers a comprehensive driver database that supports legacy hardware for most operating systems. TinkerOS and it's Debian kernel have a large number of inbox drivers for common peripherals & devices.

    If you have a device and wish to use it with a tinker board, then plug it in. Chances are that it will be compatible. If you're running a graphical interface (such as an LXDE desktop environment in the OS), then it's likely that an icon or other message will pop up to announce the new device.


    Port Power Limits

    The device advertises its own power requirements to the USB host when it is first connected. In theory, the actual power consumed by the device should not exceed stated specification.
    It should be noted that hot-swapping high-powered devices into the tinker board's USB ports may result in a brownout, which may cause the tinker board to reset.


    back

    One powerful feature of the tinker board is the row of available GPIO (general purpose input/output) pins along the edge of the board. These pins are a physical interface between the tinker board and the outside world. At the simplest level, you can think of them as switches that can be turned on or off. Of the 40 pins, 28 are GPIO pins (shared with SPI/UART/I2C pins). The tinker board is equipped with one SPI bus that offers two chip selects. The SPI bus is available on the onboard 40-pin header.


    GPIO API

    Python

    Python is a programming language that lets you work quickly and integrate systems more effectively.

    1. Install Python 2 idle:
    sudo apt-get install idle-Python2.7
    Install Python 3 idle:
    sudo apt-get install idle3

    2. Install Python GPIO library for tinker board
    Open a terminal and navigate to this folder
    cd /home/linaro/Desktop/ASUSTinkerBoard.gpio-0.1/
    sudo Python setup.py install


    3. Reference codes
    There're few sample codes under this folder
    /home/linaro/Desktop/ASUSTinkerBoard.gpio-0.1/test
    add_event_callback.py (add_event_detect function for input GPIO)
    btc.py (unit test for all functions of GPIO)
    forloop.py (pull high all GPIO and then pull down all GPIO)
    pwm.py (Software PWM function test)
    pwm_input.py (Software PWM function test by raw_input)

      4. GPIO pinout

    GPIO.Setmode
    (GPIO.ASUS)
    GPIO.Setmode
    (GPIO.BOARD)
    Pinout Physical Pin
    Number
    Pinout GPIO.Setmode
    (GPIO.BOARD)
    GPIO.Setmode
    (GPIO.ASUS)
    1 VCC3.3V_IO
    12 VCC5V_SYS
    2
    252 3 GP8A4_I2C1_SDA
    34 VCC5V_SYS
    4
    253 5 GP8A5_I2C1_SCL
    56 GND
    6
    17 7 GP0C1_CLKOUT
    78 GP5B1_UART1TX
    8 161
    9 GND
    910 GP5B0_UART1RX
    10 160
    164 11 GP5B4_SPI0CLK_UART4CTSN
    1112 GP6A0_PCM/I2S_CLK
    12 184
    166 13 GP5B6_SPI0_TXD_UART4TX
    1314 GND
    14
    167 15 GP5B7_SPI0_RXD_UART4RX
    1516 GP5B2_UART1CTSN
    16 162
    17 VCC33_IO
    1718 GP5B3_UART1RTSN
    18 163
    257 19 GP8B1_SPI2TXD
    1920 GND
    20
    256 21 GP8B0_SPI2RXD
    2122 GP5C3
    22 171
    254 23 GP8A6_SPI2CLK
    2324 GP8A7_SPI2CSN0
    24 255
    25 GND
    2526 GP8A3_SPI2CSN1
    26 251
    233 27 GP7C1_I2C4_SDA
    2728 GP7C2_I2C4_SCL
    28 234
    165 29 GP5B5_SPI0CSN0_UART4RTSN
    2930 GND
    30
    168 31 GP5C0_SPI0CSN1
    3132 GP7C7_UART2TX_PWM3
    32 239
    238 33 GP7C6_UART2RX_PWM2
    3334 GND
    34
    185 35 GP6A1_PCM/I2S_FS
    3536 GP7A7_UART3RX
    36 223
    224 37 GP7B0_UART3TX
    3738 GP6A3_PCM/I2S_SDI
    38 187
    39 GND 3940 GP6A4_PCM/I2S_SDO 40 188
    • tinker board
    • Capability
    • Documentation
    • TinkerOS
    • Hardware
    • Download
    • GPIO API