G2S
BIOS & FIRMWARE
- Driver & Tools
- BIOS & FIRMWARE
Support Penryn CPU
Fix the issue that the Penryn CPU frequency are different between Processor Type and Processor Speedy in BIOS setup menu.
Fix system hangs when hot unplug usb thumb disk in POST (Post code 0x78).
Fix the issue that the eSATA device can’t be detected under OS.
1.Fix the issue that can’t set HDD's master password with Fujitsu M120 HDD
2.If a HDD's user password has a character "0", the HDD password is not successfully unlocked when resuming from S3 or doing crisis recovery.
3.Fix the issue that while we InstantOn boot to OS, and enter S4, then press power button to resume from S4, and the system will abnorm
4. Modify the OS Passive Cooling Threshold from 100'C to 95'C
Update EC firmware to "100B5F"
1. Keep the original supervisor and user password settings if it select "No Save & Exit" or "Discard Change" in setup menu.
2. Fixed the Quiet Boot item can select if user access level is "View Only"
Update PXE Boot Rom to v1.0.20.13
First release