[DC] How to install VGA card vertically in the TUF Gaming GT501 Case? | Official Support | ASUS USA

ASUS Support FAQ

FAQ

Product TUF Gaming GT501 Case

[DC] How to install VGA card vertically in the TUF Gaming GT501 Case?

1. Remove the screw and vertical PCIE slots

2. Plug in riser cable to motherboard and VGA Card

(* Additional Riser Cable needed to use your graphic card vertically. ROG Strix Riser Cable https://rog.asus.com/cases/rog-strix-riser-cable-model/)

3. Install VGA card to vertical PCIE slots

Was this information helpful?

Yes No

North America Contact Support

If you need more help, see our solutions to get support.

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ

Back to Top