[VivoWatch] VivoWatchSP How to testing

ASUS Support FAQ

FAQ

Product ASUS VivoWatch SP (HC-A05)

[VivoWatch] VivoWatchSP How to testing "Pulse Transit Time(PTT index) ?

How to testing "Pulse Transit Time(PTT index) ?

Please refer to the following demonstration actions:

1. The watch opens the “PTT index”Screen.

2. The finger of the right thumb to cover the sensors on both sides, and confirm that the bottom ECG sensor is touching the skin surface

3. Please wait for the measurement result later (waiting time is about 1 minute)

4. The measurement result is complete

FAQ：

Q：Why do I sometimes fail to measure?

A: 1. Please make sure your thumb and index finger (Or other fingers) are completely covered and "lightly touch" the sensors on both sides

2. Make sure that the ECG sensor at the bottom of the watch is touching the skin surface

Yes No

North America Contact Support

If you need more help, see our solutions to get support.

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ