[Projectors]What is the size of the screw hole of the support tripod used by ASUS projectors? | Official Support

ASUS Support FAQ

FAQ

Product ASUS ZenBeam S2, E2, L1, P3B, P3E, S2

[Projectors]What is the size of the screw hole of the support tripod used by ASUS projectors?

A: Universal tripod screws are 1/4 inch (6.350 mm).

PS. Except for ASUS ProArt_A1_LED_Projector/ H1

Yes No

North America Contact Support

If you need more help, see our solutions to get support.

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ