[AI Router] Add TP-Link Tapo Devices to Home Assistant

This guide uses a Tapo smart plug as an example to show how to add IoT devices to Home Assistant, including basic setup and control.

 

 

1. Preparation

    First, make sure you have completed the initial setup of your device using the manufacturer's official app, connected it to your router, and confirmed it works properly.

 

2. Open the Add Devices Page

    In the Home Assistant sidebar, go to [Settings] > [Devices & Services] and click the [Add Integration] button in the lower right corner.

 

3. Search for TP-Link Integration

    Type [TP-Link] in the search bar and select it from the results.

 

4. Set Up TP-Link Smart Home

    Click [TP-Link Smart Home].

    In the pop-up window, enter the device IP address.

 

5. Select TP-Link Devices to Add

    The system will automatically find the TP-Link devices under your account. Select the devices you want to add and complete the setup.

 

6. Integration Complete

    Once setup is complete, you can see the integrated Tapo devices in the Home Assistant device overview page, and further set up automations or controls.

    For example, you can add them to the dashboard for easy control

 

 

7. Notes

   1. How to find the device IP?

       You can check it in the device list on your router

 

   2. How to set up the dashboard?

       You can refer to the guide on Setting Home Assistant Themes.

 

 

 

 

 

How to get the (Utility / Firmware)?

You can download the latest drivers, software, firmware and user manuals in the ASUS Download Center.

If you need more information about the ASUS Download Center, please refer this link.