[NUC] NUCでのFast Bootの無効化方法

解決策

電源ボタンメニューから高速起動を無効にします。この手順で電源ボタンメニューにアクセスします。

  1. システムがスリープモードやハイバネーションモードになっていないことを確認します。
  2. 電源ボタンを3秒間押し続けてから離します。電源ボタンメニューが表示されます。
    ヒント: この手順を実行してもOSに起動された場合は、ボタンを十分に長押ししていない可能性があります。この手順を実行してもシステムが完全にオフの状態のままの場合は、ボタンを長押ししすぎています（4秒以上）。
  3. F3を押して高速起動を無効にします。

https:\/\/schema.org","@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What is the purpose of holding down the power button on a computer?","acceptedAnswer":{"@type":"Answer","text":"Holding down the power button on a computer forces it to shut off. This can be useful if the computer is frozen or unresponsive and needs to be restarted. However, it is not recommended to use this as a regular way of shutting down the computer, as it can cause data loss or damage to the operating system."}},{"@type":"Question","name":"How do I reset my computer by holding down the power button?","acceptedAnswer":{"@type":"Answer","text":"To reset a computer by holding down the power button, follow these steps:\n\n1. Shut down the computer by holding down the power button for 4 seconds or until it turns off.\n2. Wait for a few seconds.\n3. Press the power button again to turn on the computer.\n\nNote: If the system boots to the OS after trying this procedure then you didn't hold the button quite long enough. If the system simply remains off after trying this procedure, then you held the button too long (longer than 4 seconds).\n\nPress F3 to disable Fast Boot."}}]}