RAMPAGE II EXTREME
RAMPAGE II EXTREME
BIOS & FIRMWARE
- Driver & Tools
- BIOS & FIRMWARE
1. Improve memory compatibility
2. Improve system stability
3. Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
1. Updated configuration table of OC Station.
2. Fixed Target DRAM Frequency incorrect for DDR3-1333 with non-extreme CPU when set
DRAM Frequency to auto in BIOS setup.
3. Supported display warning message when set CPU Voltage or QPI/DRAM Core Voltage
over 1.8V in TurboV.
1. Support OC station
2. Improve memory compatibility
3. Supported EIST function when CPU ratio is in manual mode
4. Fix Vista loading slowly if use over 3GB RAM
Fixed BIOS setup may lag when if set CPU ratio over standard ratio
1. Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
2. Fix system may not able to resume from S3 if Base Clock is set over 170MHz
Fix can't enter OS if use over 4GB RAM and Vista 64bit together with 2 pcs of GTX295 VGA card
Fix AI suite report different CPU temperature as LCD Poster
Fixed the function for adjusting BCLK abnormal in TurboV when set BCLK > 200MHz in BIOS setup
1. Fix the system would detect certain keyboard for an extended period of time.
2. Patch sometimes PC might halt during its booting up.
Improve compatibility with some Raid Controller card
1. Fixed the CPU ratio setting incorrect in TweakIt Batch File function.
2. Revised the default value of keyboard TweakIt control hotkey to "P" in BIOS setup
1. Fix system may hang after resume from S3
2. Improvie Memory compatibility
Revised QPI/DRAM Core Voltage setting in CPU Level Up
First release Bios